4LV250 (Z)

Standard Engine Package

Exhaust mixing elbow [L-type]*
Through drive exhaust**
Alternator 12V – 130A
B25 panel*
VC10 Vessel Control System**
Power steering**
Mechanical throttle sensor*
Flexible mounts
Fresh water expansion tank

*Inboard model
**Sterndrive model

Optional Accessories

High-riser mixing elbow [instead of L-elbow]*
Through hull exhaust**
Secondary alternator 12V – 130A or 24V – 110A including smart regulator
Extension harness [3m, 5m, 10m, 20m]
Second station
C35 panel*
Sidemount control head*
VC10 Vessel Control System*
JC20 Inboard Joystick*
JC10 Sterndrive Joystick**
NMEA2000 Engine monitoring system
Internal tie-bar
Semi 2-pole
SOLAS including Certificate [factory fit only]
Hot water connection
Water separator
Man Over Board Switch (single)
C-Type trolling (KMH50 only)*
On-board spare parts kit

Specifications

Rated Output
184 kW / 250 mhp: Rated Speed
3800 rpm: Displacement
2.755 L / 168 cu. in: No. of cylinders
4 cylinders: Cylinder Bore x Stroke
92 mm x 103.6 mm / 3.6 in x 4 in: Combustion system
Direct Injection, Denso Common Rail System: Aspiration
Turbocharged & Intercooled: Alternator
Denso 12V - 130A: Dry weight without gear
334 kg / 736 lbs: Dimensions
1151 mm x 755 mm x 772 mm: Controls
Mechanical (optional - VC10 system): Certifications
RCD 2 IMO Tier 2 EPA Tier 3 BSO II EMC SOLAS

NOTE:
1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KMH50A marine gear
(Dimensions may vary with other gears/elbow)
*Please note, the 4LV250 is not EPA Commercial certified.